Lithonia Lighting Wafer 6 in. Oil-Rubbed Bronze Integrated LED Recessed Kit : Warranty (2024)

Lithonia Lighting Wafer 6 in. Oil-Rubbed Bronze Integrated LED Recessed Kit : Warranty (1)

STATEMENT OF LIMITED WARRANTY

FOR ACUITY BRANDS LIGHTING, INC.

LED COMMERICAL INDOOR PRODUCTS

FOR SHIPMENTS WITHIN THE UNITED STATES AND CANADA

10/01/12

Subject to the exclusions set forth below, Acuity Brands Lighting, Inc. (“Acuity”) warrants its commercial indoor light emitting diode (LED) fixtures,

including the LED arrays and the LED drivers and integral control devices (“Product(s)”) to be free from defect in material and workmanship (the

General Warranty”) for a period of five (5) years from the date of shipment from Acuity’s facilities. The LED arrays in the Product(s) will be

considered defective in material or workmanship only if a total of 15% or more of the individual light emitting diodes in the Product(s) fail to

illuminate.

Ballasts, lamps, emergency batteries and poles are excluded from the General Warranty. Holophane® and Accupro® brand ballasts,

Acculamp® brand lamps, emergency batteries, and poles are warranted separately; and the terms of such warranties are located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Manufacturers of ballasts, lamps, emergency batteries and poles

incorporated into the Product(s) are solely responsible for any costs or expenses related to any claims, repairs, or replacements associated with

any such component(s). Assistance with warranty claims for any such component(s), and/or copies of each applicable manufacturer’s warranty,

may be obtained from an authorized Acuity post-sales or customer service representative.

This Statement of Limited Warranty (“Warranty”) applies only when the Product(s) are installed in applications in which ambient temperatures

are within the range of specified operating temperatures and are operated within the electrical values shown on the LED driver Label. Acuity will

not be responsible under this Warranty for any failure of the Product(s) that results from external causes such as: acts of nature; physical

damage; exposure to adverse or hazardous chemical or other substances; use of reactive cleaning agents and/or harsh chemicals to clean the

Product(s); environmental conditions; vandalism; fire; power failure, improper power supply, power surges or dips, and/or excessive switching;

induced vibration; animal or insect activity; fault or negligence of purchaser, any end user of the Product(s) and/or any third party not engaged by

Acuity; improper or unauthorized use, installation, handling, storage, alteration, maintenance or service, including failure to abide by any product

classifications or certifications, or failure to comply with any applicable standards, codes, recommendations, product specification sheets, or

instructions of Acuity; use of the Product(s) with products, processes or materials supplied by any end user or third party; or any other

occurrences beyond Acuity’s reasonable control. Acuity also will not be responsible under this Warranty for any substantial deterioration in the

Product finish that is caused by failure to clean, inspect or maintain the finish of the Product(s). If the Product(s) are used on existing

foundations, anchorages or structures, the end user is solely responsible for the structural integrity of such existing foundations, anchorages or

structures and all consequences arising from their use. Adequate records of operating history, maintenance, and/or testing must be kept by the

end user and provided to Acuity upon request to substantiate that the Product(s) have failed to comply with the terms of this Warranty. Neither

polycarbonate nor acrylic material used in the Products is warranted against yellowing, as yellowing may naturally occur over time due to normal

aging. The Product(s) are not warranted against costs that may be incurred in connection with changes or modifications to the Product(s)

required to accommodate site conditions and/or faulty building construction or design. In addition, the Product(s) are not warranted against cost

resulting from installation of a third party components, failures of third party supplied components, or failures of Acuity supplied Product(s)

caused by a third party supplied component. This Warranty only applies to the Product(s) when sold for commercial purposes and does not

apply to any consumer product(s), all of which are governed by separate limited warranty terms. For the avoidance of doubt, Acuity emergency

fixtures are not covered by this Warranty.

If the Product(s) fail to comply with the terms of this Warranty, Acuity, at its option, will repair or replace the Product(s) with the same or a

functionally equivalent Product(s) or component part(s). This Warranty excludes labor and equipment required to remove and/or reinstall original

or replacement parts. This Warranty extends only to the Product(s) as delivered to, and is for the sole and exclusive benefit of, the original end

user of the Product(s) at the original location. This Warranty may not be transferred or assigned by the original end user. The repair or

replacement of any Product(s) or component part within the Product(s) is the sole and exclusive remedy for failure of the Product(s) to comply

with the terms of this Warranty and does not extend the Warranty period. Warranty claims regarding the Product(s) must be submitted in writing

within (30) days of discovery of the defect or failure to an authorized Acuity post-sales or customer service representative. Product(s) or

component part(s) may be required to be returned for inspection and verification of non-conformance by Acuity, but no Product(s) or component

part(s) will be accepted for inspection, verification or return unless accompanied by a “return authorization number” which can be obtained only

from an authorized Acuity post-sales or customer service representative. Acuity is not responsible for any costs and expenses incurred in

connection with shipment of Product(s) to Acuity, but Acuity shall bear all cost and expense incurred in connection with shipment of replacement

Product(s) to the customer.

THE FOREGOING WARRANTY TERMS ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, AND ACUITY EXPRESSLY DISCLAIMS

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, RELATING DIRECTLY OR INDIRECTLY TO THE PRODUCT(S), WHETHER ORAL,

WRITTEN, OR ARISING BY COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ,WITHOUT LIMITATION, ANY WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO AGENT, DISTRIBUTOR OR OTHER SUPPLIER OF ACUITY PRODUCTS

HAS THE AUTHORITY TO MODIFY OR AMEND THIS WARRANTY WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM ACUITY.

The total liability of Acuity on any and all claims of any kind, whether in contract, warranty, tort (including negligence), strict liability or otherwise,

arising out of or in connection with, or resulting from, Acuity’s performance or breach of this Warranty, or from Acuity’s sale, delivery, resale,

repair, or replacement of any Product(s) or the furnishing of any services, shall in no event exceed the purchase price allocable to the Product(s)

that give rise to the claim, and any and all such liability shall terminate upon the expiration of the warranty period specified above.

Lithonia Lighting Wafer 6 in. Oil-Rubbed Bronze Integrated LED Recessed Kit : Warranty (2024)

References

Top Articles
Latest Posts
Article information

Author: The Hon. Margery Christiansen

Last Updated:

Views: 5867

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: The Hon. Margery Christiansen

Birthday: 2000-07-07

Address: 5050 Breitenberg Knoll, New Robert, MI 45409

Phone: +2556892639372

Job: Investor Mining Engineer

Hobby: Sketching, Cosplaying, Glassblowing, Genealogy, Crocheting, Archery, Skateboarding

Introduction: My name is The Hon. Margery Christiansen, I am a bright, adorable, precious, inexpensive, gorgeous, comfortable, happy person who loves writing and wants to share my knowledge and understanding with you.